Transformers Takara Tomy Masterpiece Mp36+ Mp-36+ Megatron
Brand: TAKARA TOMY
Main material: plastic ABS
Rule grid: about 25cm high

Figure scale: 24 inches
Converts from robot to Autobot Command Center mode in 37 steps.
Command Center mode includes a tank, rocket, control tower, and defense perimeter.
Included Micromaster, Autobot Countdown, fits inside rocket, tank, and control tower, and can ride along the defense perimeter.
Use the 6 included Fire Blasts accessories to simulate battle effects on Omega Supreme figure and Command Center mode.

-Under the supervision of Hajime Katoki, armament and additional armor are composed with new interpretations. Pursuing proportions that do not become dull while maintaining a profound feeling.
-Uses a movable roll for the forearm to achieve a wide range of movement. When the arm is raised horizontally, it is structured to move in conjunction so that the additional armor does not interfere.
-When raising the legs, additional armor of the front armor is deployed upwards to ensure a range of motion.
-Missile pods loaded in various places are reproduced with interpretation unique to Ver.Ka. You can also open and close the hatch manually and enjoy the built-in missile display.
-Includes Ver.Ka decals that include different chest numbering. The FAZZ platoon in the work can be reproduced.

[accessories]
・ Double beam rifle X 1
・ Hyper Mega Canon × 1
・ Water transfer decal x 1
・ Foil seal x 1

- High-density detail by Hajime Katoki's complete supervision. Sealing of texture representation and gimmick in the play, reproduction without leaving the heavy equipment out of the standard.

- 01: huge thrusters full reproduction of anime new setting
Also reproduced without leaving huge thrusters that appeared to in the play. The large backpack equipped with a sub-arm, three large thrusters. In addition it can also be a suspension of the various weapon and. Achieve the overwhelming volume.

- 02: the sub-arm equipped with the expansion gimmick
Sub-arm is a large number of axis is charged, moving to flexible. Tip of the claw can also be provided with a weapon.

- 03: opening and closing in the cockpit hatch three stages
Cockpit is opened and closed in three stages. While realizing a gimmick in the play, produce a multiple sense.

- 04: Power pipe sealing texture reproduction
Reproduce the sealing to protect the indirect section and the power pipe with a plastic material in Thunderbolt Chu region.

- 05: the sole of the foot claw implementation
Equipped with a movable gimmick to the back foot of the claw. Enjoy the setting of the Thunderbolt version unique in the gimmick.

- 06: accessory parts overwhelming volume
A new set to the huge thrusters in the anime version, in addition to the beam bazooka, comes with a wide Weapon. Some armed plurality accessories, have become commodity content of large volume.

- Accessories: beam bazooka, Giant bazooka × 3, Zaku machine gun × 2, heat Hawk × 2, Shutsurumu Faust × 3, Zaku machine gun spare magazine × 4, grip hand (left and right), weapons possession ( left and right), pedestal, stand

Includes

Blast Impulse Gundam
2 Anti-Armor Knives
Core Splendor
γ Blast Silhouette pack
"Kerberos" High-Energy Long-Range Beam Cannon
Quadruple Missile Launcher
Beam Javelin
Beam Rifle
Shield
Foldable adapter
1 pair of non-articulated hands
1/100 Shinn Asuka figurines (standing, sitting)
1/100 Lunamaria Hawke figurines (standing, sitting)
Adapter for Chest Flyer
Adapter for Leg Flyer
Adapter for Force Silhouette
Launchpad for Force Silhouette
Landing Gears for Shield
Landing Gears for Leg Flyer

- Following the 2012 release of the the v Gundam comes Char’s rival Suit: the hugely-anticipated Sazabi Ver.Ka!
- A year after the release of the MG v Gundam Ver.Ka, rival Suit Sazabi has appeared at last. Featuring engineering techniques created for the MG RX-78-2 Gundam 3.0 and the v Gundam Ver.Ka, the Sazabi is one of the most advanced kits to date.
- MG Sazabi Ver.Ka designed in conjunction with the CG images shown of at the Gundam Front Tokyo DOME-G, and is paired with the similarly designed v Gundam

- Accessories: Sazabi Shield, Beam Tomahawk, Beam Rifle, Funnel x6

[ACCESSORIES]
GN Sword II x 2
GN Buster Sword III x 1 [2 parts]
GN Beam Saber x 2
GN Shield x 1 [2 parts]
0 Raiser / XN Raiser x 1
The MG 00 XN Raiser debuts in the Master Grade series to celebrate the Mobile Suit Gundam 00 10th anniversary! Even though it shares the same molds with the 00 Raiser this kit offers lots of newly molded parts, from the 0 Raiser's backpack extension XN Raiser to its GN Buster Sword IIIs!

The kit also comes with a mini stand to support its heavy weight backpack when in standing position. It also comes with a newly printed sheet of water slide decal for detailing.

- The kit became available worldwide as a regular retail kit, also to help celebrate the 00 Gundam's 10th anniversary. Limited quantities were made during the time of its first production.

Includes
RX-78-2 Gundam
2 Beam Sabers
Beam Rifle
Shield
1 pair of trigger hands
2 Double Separators

Includes
Nightingale
10 removable Funnels (5 on each binders)
Mega Beam Rifle
Shield
Beam Tomahawk
Adapter

Kit Features & Gimmicks
Manipulators are fully poseable.
Mono-eye can move left or right via a switch underneath.
Elbow and knee joints can be bent up to 70 degrees.
Hip joints can...
Tilt upwards/downwards on each piece.
Rotate on each thigh.
Funnels can be optionally detached from the binders.
The small panel on the Forearms can be optionally removed to reveal mounting points for the shield adapter.
Beam tomahawk handle can optionally attach into/detach from the shield.
Nightingale's neck can be accommodated with a green Gunpla LED Unit (sold separately).

- HG Freedom Gundam comes with a special version of the color.
- Also supports HG Justice Gundam.

Includes
Unicorn Gundam
Antenna
Transformable
Unicorn Mode
1/100 Banagher Links figurine (sitting)
1 pair of Beam Sabers
1 pair of Beam Tonfas
Beam Magnum
3x5 E-pacs
Hyper Bazooka
Ammo pack
Shield
1/100 figurines
Banagher Links (Pilot Suit) (Standing, sitting)
Banagher Links (Civilian suit)
Audrey Burne
Cardeas Vist
MS Cage
Storage container
Adapter for Action Base

Kit Features & Gimmicks
Articulation
Unicorn Gundam can convert into Unicorn or Destroy mode.
Manipulators feature 3+1+1 articulation on each finger.
Elbow joints can be bent to 130 degrees.
Knee joints can be bent to 80 degrees.
the upper thigh joints can...
Tilt upwards/downwards on each piece.
Rotate on each thigh.

Weapons/Other Gimmicks
Unicorn Gundam can convert into Unicorn or Destroy mode.
The antenna can be swapped with either transforming or non-transforming pieces.
The arms' Beam Saber panels can flip out to form Beam Tonfas.
The Beam Sabers on the backpack can be optionally removed as handheld weapons.
The Beam Magnum's E-Pacs can be swapped.
The Beam Magnum's barrel can be slightly pulled forward, and one of the upper E-pacs can be removed to recreate its reloading feature.
The Hyper Bazooka can be converted between standby and deployed forms.
Its ammo pack can be optionally separated from the weapon.
The shield's adapter is multi-jointed, allowing for some poses while mounted onto the forearm.
Beam Magnum and Hyper Bazooka can mount onto the backpack via flip-out tabs.
Each of their respective ammo packs can also be mounted onto the rear waist armor.
Unicorn Gundam (in Unicorn Mode) can mount onto the MS Cage.
The MS Cage's arms can swing forwards and backward.
All of the Weapons and Beam Saber effect parts can store onto the MS Cage.
Unicorn Gundam can mount with the Action Base via an adapter.

- Accessories: Nichirinmaru , Tanegashima Gun, Sankoumaru Jumonji Yari, Denkoumaru Naginata, Folding Screen, Spear Stand x2, Gun/Sword Stand

Accessories: Beam Rifle x2, Bazooka x2, Hand Grenade x4,
Missile Launcher with Grenade Launcher x2, Beam Blade x4, Shield x3,
Gatling Gun x6, Hyper Beam Javelin x2, Action Base Joint x4, Booster Vernier Stand x4
Item Size/Weight : 39.1 x 31.1 x 15.7 cm / 1673g

Takara Tomy presents MP-14C Clampdown, a redeco of the Masterpiece Red Alert.
This speedy Autobot transforms into a licensed Lamborghini Countach LP500S.
Clamp Down includes Automatic Handgun, Rocket Launcher, Pile Drivers, Character Card, and Operating Instructions.

- Mobile Suit Gundam: Unicorn's Crimson Comet, the Sinanju is re-released as a Master Grade kit following design specifications from the anime- including the iconic bazooka!
- Includes redesigned marking decals
- Inner Frame material changed from PVC to paintable ABS.
- Anime-accurate bazooka included, and equipped with a telescoping gimmick.

- Accessories: Beam Rifle , Shield, Beam Saber x2, Beam Axe x2,
Bazooka, Pilot Figure (standing, sitting), Joint for Action Base 1
Item Size/Weight : 39 x 31 x 12.3 cm / 1168g