- Accessories: Dober Gun, Shield, Beam Saber x2, 1/100 Zechs Marquise (Standing) 1/100 Zechs Marquise (Sitting), Fist (Left and Right), Open Palm (Left and Right), Weapon Grip (Left and Right)

Includes

ZGMF-X20A Strike Freedom Gundam
DRAGOONS x8 (EQFU-3X Super DRAGOON Mobile Weapon Wing & MA-80V Beam Assault Cannon)
Beam Saber x2 (MA-M02G "Super Lacerta")
Railgun x2 (MMI-M15E "Xiphias 3")
Beam Shield Generator x2 (MX2200)
High-energy Beam Rifle x2 (MA-M21KF)
Display Stand
1/100 Kira Yamato figurine
1/100 Lacus Clyne figurine

- Accessories: Tanegashima Gun x1, Nichirinmaru Katana x1, Denkoumaru Naginata x1, Sankoumaru Jumonji Yari x1
Item Size/Weight : 39 x 31.1 x 9.4 cm / 931g

- Accessories: Dragon Fang, Beam Trident, Shield

Includes

RX-78-2 Gundam
2 Beam Sabers
Core Block
1/100 Amuro Ray figurine (sitting)
Beam Rifle
Shield
Bazooka
Transformable Core Fighter
1/100 Amuro Ray figurine (standing)
A Sheet of Marking decals
Adapter for Action Base 1
Kit Features & Gimmi

Includes
Unicorn Gundam
Antenna
Transformable
Unicorn Mode
1/100 Banagher Links figurine (sitting)
1 pair of Beam Sabers
1 pair of Beam Tonfas
Beam Magnum
3x5 E-pacs
Hyper Bazooka
Ammo pack
Shield
1/100 Banagher Links figurine (Standing)
Adapter for Action Base

Kit Features & Gimmicks
Articulation
Unicorn Gundam can convert into Unicorn or Destroy mode.
Manipulators feature 3+1+1 articulation on each finger.
Elbow joints can be bent to 130 degrees.
Knee joints can be bent to 80 degrees.
the upper thigh joints can...
Tilt upwards/downwards on each piece.
Rotate on each thigh.

Weapons/Other Gimmicks
Unicorn Gundam can convert into Unicorn or Destroy mode.
The antenna can be swapped with either transforming or non-transforming pieces.
The arms' Beam Saber panels can flip out to form Beam Tonfas.
The Beam Sabers on the backpack can be optionally removed as handheld weapons.
The Beam Magnum's E-Pacs can be swapped.
The Beam Magnum's barrel can be slightly pulled forward, and one of the upper E-pacs can be removed to recreate its reloading feature.
The Hyper Bazooka can be converted between standby and deployed forms.
Its ammo pack can be optionally separated from the weapon.
The shield's adapter is multi-jointed, allowing for some poses while mounted onto the forearm.
Beam Magnum and Hyper Bazooka can mount onto the backpack via flip-out tabs.
Each of their respective ammo packs can also be mounted onto the rear waist armor.
Unicorn Gundam can mount with the Action Base 1 via an adapter.

Includes

Gundam Barbatos
1/100 Mikazuki Augus figurine (sitting)
Mace
Dagger x2
Long Sword
Smoothbore gun
1/100 Mikazuki Augus figurine (standing)
Interchangeable fingers
Closed fist (1 pair)
Weapon-holding (1 pair)
Expressive/open-palm (1 pair)
Action Base adapter

Accessories: Beam Rifle x2, Bazooka x2, Hand Grenade x4,
Missile Launcher with Grenade Launcher x2, Beam Blade x4, Shield x3,
Gatling Gun x6, Hyper Beam Javelin x2, Action Base Joint x4, Booster Vernier Stand x4
Item Size/Weight : 39.1 x 31.1 x 15.7 cm / 1673g

Includes
Freedom Gundam
2 Beam Sabers
Index-to-Pinky fingers
Holding
Relaxed
Trigger (right)
Beam Rifle
Shield
1/100 Kira Yamato figurines (standing, sitting)
Display Stand
Adapter

- In the face mask is equipped with a mechanism that slides upward from the normal form.
- Comes with a variety of weapon equipped.

- Accessories: Trikeros Shield, Lancer Dart, Beam Saber x2,
Gleipnir Claw

- Accessories: 60mm High-Energy Beam Rifle, Beam Saber x4,
Grip (Left and Right), Open Palm (Left and Right)

- MG Raiser, go!
- Internal frame structure based partly off original Gundam 00 and partly off the Raiser.
- Utilize the Gunpla LEDs to showcase GN particle emissions in the head, GN Drives, and particle storage tanks.
* This product has five LED-enabled locations, and includes a single LED unit. Four additional Gunpla LED units required for full effect..
- Cockpit block features opening hatch.
- Raiser binder is equipped with opening gimmick.
- Thanks to new molds, weapons such as Raiser Sword can be recreated.

- Accessories: GN Sword II x2, GN Shield, GN Sword III, GN Beam Saber,
1/100 pilot figure (Standing, Sitting)
Item Size/Weight : 39.1 x 31.2 x 9.5 cm / 992g

Includes
00 Qan[T]
6 GN Sword Bits
GN Sword V
GN Drive display stand
Setsuna F. Seiei figurine
Action Base 2 Display Stand

Kit Features & Gimmicks
Articulation
Manipulators feature 3+1+1 articulation.
The wrists feature double-jointed parts.
Elbow joints feature a wider range of articulation due to its circular design.
The legs feature double-jointed knee parts.
The hip joint axis can swing up and down.
The upper thigh joints can...
Tilt upwards/downwards on each piece.
Rotate on each thigh.
Ankle joints can tilt left or right.
The toes on each foot are poseable.

Weapons/Other Gimmicks
GN Sword V can convert into Sword or Rifle mode.
GN Sword can be mounted onto the side waist armor via parts swapping.
GN Sword Bits can detach from or attach on the Shield.
The Sword Bits on the shield can rearrange to form firing mode.
GN Sword Bits can combine with GN Sword V & can be rearranged into GN Buster Sword or GN Buster Rifle.
The GN Sword Bits can be used as individual melee weapons via flip-out handles.
GN Drive can detach from 00 Qan[T] and can be displayed separately with the GN Drive display stand.
00 Qan[T] can be rearranged into Quantum Burst Mode.
GN Drive can light up with Green LED Unit (Sold Separately)

Tips & Tricks
For better results, some/most of the details are needed to be applied & panel-lined with Gundam Markers and/or Mr. Color paints.
Top coat (Mr. Hobby recommended) can be used to protect applied decals.
If using matte/flat-finish top coat, it is advisable not to spray on the clear/translucent parts - can be done by masking or spraying top coat while the said parts are separated.
The middle, ring, pinky fingers can be sliced off for individual articulation. (NOTE: May decrease gripping stability.)

- accessories
· Twin Buster Rifle × 1
· Beam · saber × 2
· Shield × 1

- Product content
· Completed frame × 1
· Molded article × 15
· Lead wire × 2
· Instruction manual × 1

- Accessories: Beam Rifle (pistol) × 2, × 2 sets bits

- From the anime Mobile Suit Gundam Wing, the HGAC of the Wing Gundam Zero!
- The first High Grade of Heero’s beloved Wing Gundam Zero from Gundam W, this kit is designed to enable transformation into Neo-Bird form.
- Twin Buster Rifle can combine into full form or be split in two, and shoulder vulcans are expandable.

- Accessories: Twin Buster Rifle, Wing Shield, Beam Saber x2,
Vulcan Cannon x2, Manipulator (Left and Right)
Item Size/Weight : 29.9 x 19 x 5.9 cm / 275g

[accessories]
· Armed Armor × 2
· Beam · Magnum × 1

[Product content]
· Molded article × 10
· Foil seal × 1
· Instruction manual × 1

- Accessories: MA-M21KF high-energy beam rifle × 2, MA-M02G Gerhard Pale Rakeruta beam saber × 2, MX2200 beam shield

- Accessories: Add vernier × × enhancement device 2, GN Field 4, GN Cannon × 2,
GN beam machine gun for Seraphim, GN Bazooka, GN Cannon × 4

- Accessories: beam rifle, hyper bazooka, shield, beam saber × 2, fist (left and right), Hirate (left and right)