Accessories: Gerbera Straight, beam rifle, shield, beam saber × 2, pilot figure

Includes

GN-0000 00 Gundam
2 GN Beam Saber hilts
GNR-010 0 Raiser (transformable)
GN Sword II x2
2 GN Sword II Beam effect
GN Sword III
GN Sword III Beam effect
GN Shield x2
GN Beam Saber x2
Large GN Condenser x2
1/144 Setsuna F. Seiei figurine
1/144 Saji Crossroad figurine

Includes
XXXG-00W0 Wing Gundam Zero EW
Beam Sabers x2
Buster Rifle x2
1 pair of open palm manipulators
1 pair of weapon-holding manipulators
1 pair of closed fist manipulators
1 pair of 3-1-1 poseable manipulators
1/144 Heero Yuy figurine
Adapter for Action Base

Kit Features & Gimmicks
Manipulators feature 3+1+1 articulation.
Arms and Legs feature double-jointed elbow/knee parts for a wider range of articulation.
Shoulder parts can...
Extend outwards as part of the transformation into "atmospheric-entry" mode
Swing back and forth.
The hip sections feature universal joints for wider range of articulation.
Cockpit hatch can be opened and closed.
Hatches on the clavicle section can be opened to reveal the Machine Cannons (4-barrel Gatling guns).
This kit has a minor transformation gimmick: atmospheric-entry mode
The Buster Rifles can be combined.
Wing Gundam Zero can be mounted onto the Action Base via an adapter.

Tips and Tricks
For better results:
The parts can be panel-lined with Gundam Markers.
The kit can be sprayed with Mr. Hobby Top Coat.
The RG Expansion Effect Unit: Seraphim Feather (Premium Bandai exclusive) is compatible with this kit
The RG XXXG-00W0 Wing Gundam Zero EW Option Parts for Twin Buster Rifle is a Gundam ACE (February 2015 issue) exclusive kit featuring add-on weapon parts for this kit.

Includes

ZGMF-X20A Strike Freedom Gundam
MA-M21KF High Energy Beam Rifle x2
MA-M02G "Super Lacerta" Beam Saber x2
MX2200 Beam Shield

- Accessories: beam rifle, beam saber × 2, beam shield, shield,
Beam boomerang × 2, beam sword, long-range beam cannon

Includes

Gundam MK-II (AEUG)
2 Beam Sabers
Vulcan Pod System
Beam Rifle
Shield
Missile Pod
Hyper Bazooka
Bazooka Magazine
1/144 Kamile Bidan figurine
Test Version parts
Adapter for Action Base

- Accessories: Beam Rifle, Hyper Bazooka, Vulcan pod, beam saber × 2,
Shield, complete parts selection formula ×

- Accessories: Rakeruta saber × 2, anti-laminated beam shield
Lupus beam rifle, look in the wrist (left), with rifle wrist (right)

Includes
Strike Gundam
2 Armor Schneiders
Poseable hands
Beam Rifle
Shield
Aile Striker
2 Beam Sabers
Lower hilts
Standard
Molded pegs
Adapter for Action Base

Includes
Zaku II
Advanced MS Joint 2 Frame
Machine Gun
Heat Hawk
Connector Joint
Zaku Bazooka
Joint piece for Action Base
Char Aznable Figurine

Kit Features & Gimmicks
The 3+1+1 Manipulators are poseable.
Arms and Legs feature double-jointed elbow/knee parts for a wider range of articulation.
Magazine Drum can detach from the Machine Gun, and it can mount onto either side or the bottom part of the rear waist armor.
Heat Hawk can store onto either side or rear waist armor via a joint part.
Bazooka can store onto the rear waist armor by flipping down the rear waist's built-in joint.

Includes
Zaku II Kai
Fritz Helmet type
Commander type
3 Hand Grenades
1 extra piece
2 Handles
Machine Gun
Ammo pack
Grenade Launcher
Heat Hawk
Adapter
Right trigger hand
Left open hand

Includes
Nightingale
10 removable Funnels (5 on each binders)
Mega Beam Rifle
Shield
Beam Tomahawk
Adapter

Kit Features & Gimmicks
Manipulators are fully poseable.
Mono-eye can move left or right via a switch underneath.
Elbow and knee joints can be bent up to 70 degrees.
Hip joints can...
Tilt upwards/downwards on each piece.
Rotate on each thigh.
Funnels can be optionally detached from the binders.
The small panel on the Forearms can be optionally removed to reveal mounting points for the shield adapter.
Beam tomahawk handle can optionally attach into/detach from the shield.
Nightingale's neck can be accommodated with a green Gunpla LED Unit (sold separately).

Includes

Guncannon Detector
2 Beam Cannons
Beam Rifle
Beam Gun
170mm Cannon

- The kit in 1/100 scale Gundam prototype Unit 4, which is the original form of MS Gerbera Tetra that appeared in the Mobile Suit Gundam 0083 Stardust Memory]. The cause draw a new design image for RE / 100, reproduced in a contemporary form.

- Reproduce the distinctive rear booster
Reproduce the Shutsurumu booster of back which is a feature of the aircraft. Booster three is detachable. Two upper, also reproduce gimmick that connects the saber-rack. Landing skid bottom booster can reproduce the storage and deployment in the parts replacement. Skid deployment at the time also function as a support of the body upright.

- Rich armed parts included
Long-range rifle comes with can be equipped with two-handed, both forms of one hand possession. Energy CAP remove, can be attached to the shield back.

- Accessories: Long-range rifle, beam rifle, shield, beam saber × 2, beam Jitte

- Beam Rifle can be mounted on board the Striker
- Aile Striker pack is removable and can be mounted on the back of the PG Strike Gundam.
- Includes Display Stand, and Stand for the Strike Gundam’s weaponry.
- Landing Gear is deployable, and wings can be adjusted.
Item Size/Weight : 39.3 x 32 x 11 cm / 1046g

- Model No. SS, Ver New World ed. And set sail!
- Pirate Ship Straw, Ver Hen Thousand Sunny New World. And then appeared.
Dog Soldier Systems 'Sunny' is characteristic of the items reproduced on accessories. We Luffy
'Straw' is a figure wearing the growth of the New World Guide!
- Dog Soldier Systems ... paddle deployment, as well as to aid Sunny voyage number
Three mechanisms can be displayed along with the mother ship. (Shiromokuba No. 1 and No. 2 Minimeri,
Shark submerged No. 3)
- Lion's Head peak. Gaon Cannon (bow) `` Gaon cannon turret to expand from the replacement
Reproduce parts. Strongest weapons issue was Sunny's crying too impressed Luffy to be missed!
- Edited by Straw studded New World! ... Luffy, Zoro, Nami, Usopp, Sanji, Chopper,
Robin, Franky, Brook
※ Figures are not painted.

- Nobody can stop this momentum! From the super popular anime "One Piece",
here is a plastic model kit of Going Merry Sailing Ship!
- A great display model for the One Piece fans, as well as sail boat model kit fans too!
- The creases of the mast and the Pirate Symbol have been reproduced!
The mast has been made with translucent polystyrene plastic, and even the creases
had been reproduced. The Pirate Symbol can be reproduced by either
marking sticker or water transfer decal.
- The Straw Hat Crew figures are included!
The crew had been reproduced to match the scene. Included Nami, Chopper, Ussopp,
Luffy, Sanji, and Zoro.
- Cannon, Rope ladder, Barrel, Wooden box, Anchor

- Accessories: Anchor, Figure x6 (Nami, Chopper, Ussopp, Luffy, Sanji, Zoro), Barrel,
Wooden Box, Rope Ladder, Cannon, Orange Tree x3, Display Stand

- Accessories: Chopper figure (Standing-sitting)

[accessories]
- Rifle × 1
- Axe × 1
- Claw × 1

Item Size/Weight : 31 x 20 x 13.2 cm / 673g

Includes

Gundam Astray Blue Frame Second L
Tactical Arms
2 Armor Schneiders
1/20 Gai Murakumo Figurine
1/20 Lowe Guele Figurine (OVA)

- accessories

· Double beam · rifle × 1
· Hyper · Beam · Saber × 2
· Hand grip (right and left) × 1 each
· Saber hand (left and right) × 1 each
· Hand for transformation (right and left) × 1 each
· Weapon possession (right) × 1