- High-density detail by Hajime Katoki's complete supervision. Sealing of texture representation and gimmick in the play, reproduction without leaving the heavy equipment out of the standard.

- 01: huge thrusters full reproduction of anime new setting
Also reproduced without leaving huge thrusters that appeared to in the play. The large backpack equipped with a sub-arm, three large thrusters. In addition it can also be a suspension of the various weapon and. Achieve the overwhelming volume.

- 02: the sub-arm equipped with the expansion gimmick
Sub-arm is a large number of axis is charged, moving to flexible. Tip of the claw can also be provided with a weapon.

- 03: opening and closing in the cockpit hatch three stages
Cockpit is opened and closed in three stages. While realizing a gimmick in the play, produce a multiple sense.

- 04: Power pipe sealing texture reproduction
Reproduce the sealing to protect the indirect section and the power pipe with a plastic material in Thunderbolt Chu region.

- 05: the sole of the foot claw implementation
Equipped with a movable gimmick to the back foot of the claw. Enjoy the setting of the Thunderbolt version unique in the gimmick.

- 06: accessory parts overwhelming volume
A new set to the huge thrusters in the anime version, in addition to the beam bazooka, comes with a wide Weapon. Some armed plurality accessories, have become commodity content of large volume.

- Accessories: beam bazooka, Giant bazooka × 3, Zaku machine gun × 2, heat Hawk × 2, Shutsurumu Faust × 3, Zaku machine gun spare magazine × 4, grip hand (left and right), weapons possession ( left and right), pedestal, stand

Includes
Providence Gundam
3 Large DRAGOON Pods
8 Small DRAGOON Pods
Firing effects
Beam Rifle
Composite Armed Shield System
Beam Saber effect Part
Index-to-Pinky finger parts
Holding
Fists
Relaxed
Splayed
1/100 Rau le Creuset figurines (standing, sitting)
Adapter for Display Stand
BA2 Display Stand (Regular only)
Z.A.F.T. Display Stand (G.U.N.D.A.M. Editions only)

Kit Features & Gimmicks
The Index-to-Pinky finger parts can be swapped.
Cockpit hatch can be optionally opened to reveal pilot figurine.
Arm and Legs feature double-jointed parts for a wider range of articulation.
Wrist joints can tilt.
Waist can tilt on four directions in a limited manner.
Hip joints can...
Tilt upwards/downwards on each piece.
Rotate on each thigh.
DRAGOON Backpack can tilt back and forth by extending its built-in connection joint.
Left and right thrusters can tilt up to reveal additional sub-thrusters.
The Small DRAGOON Pods' waist and backpack joints can tilt up and down/forward and backward.
DRAGOON Pods can be optionally removed from the backpack and waist sections.
DRAGOON Pods can also be displayed with the firing effect parts.
Beam Rifle's foregrip can swing left or right.
Composite Armed Shield System can attach on/remove from the left arm.
Providence Gundam can attach onto the Display Stand via an adapter.

Type S [Support] accessories


Long Distance Beam Gun "Mega Beam Cannon"
4-beam Beam Cannon and 2-missile Missile pod
Cruising Missiles
Support Jack

Type E [Electronic] accessories

Radome
Directional Jamming Rifle
Electronic warfare equipment for the shoulders and back waist

Includes

Blast Impulse Gundam
2 Anti-Armor Knives
Core Splendor
γ Blast Silhouette pack
"Kerberos" High-Energy Long-Range Beam Cannon
Quadruple Missile Launcher
Beam Javelin
Beam Rifle
Shield
Foldable adapter
1 pair of non-articulated hands
1/100 Shinn Asuka figurines (standing, sitting)
1/100 Lunamaria Hawke figurines (standing, sitting)
Adapter for Chest Flyer
Adapter for Leg Flyer
Adapter for Force Silhouette
Launchpad for Force Silhouette
Landing Gears for Shield
Landing Gears for Leg Flyer

- Faithfully reproduce the body shape of Double O Quanta Full Saber!
- Armor equipped with a variety of mechanisms `GN Sword IV Full Saber` is reproduced with new parts.
- The GN capacitor is mounted and the back part with the connection part with GN sword IV is reproduced by new modeling.
- A head antenna that imaged visuals drawn by Mr. Ebi Ogawa Kan Attack comes with new modeling.
- Marking seals are included, including markings for GN Sword IV Full Saber.
- Base for GN sword IV is included.

[accessories]
- GN Sword IV × 1
- GN Gamblade x 3
- GN sword V × 1
- GN sword bit
- GN shield × 1
- Display arm for arms × 1

[Product content]
- Molded article × 23
- Marking seal × 1
- Foil seal × 1
- Dry decal × 1
- Instruction manual × 1

( This is a machine translation. Please allow for possible misinterpretations in the text. )

Item Size/Weight : 39 x 31 x 9.5 cm / 880g

- With a renewed design from master mechanical designed Hajime Katoki, the Musha Gundam Mk-II, has received a Master Grade version for the first time!
- Thanks to the many mobile joints built into the Suit, a variety of dynamic poses are made possible.
- The characteristic armor has been reproduced- from the unique shapes to the gold-plated accents and steel-plated katana!
- Armed with dual Katana, one at each hip, as well as as Rifle and Naginata on the backpack.

- Accessories: Katana x2, Naginata, Rifle
Item Size/Weight : 39.2 x 31 x 9.7 cm / 816g

- accessories
· RQM51 Bussell beam boomerang × 2
· MA-M01 Rakeruta-beam saber × 2
· MA-M20 Alps beam rifle × 1
Laminate anti-beam shield × 1

- Accessories: Shield, Beam Gatling Gun, Army Knife, Missile Pods, Beam Saber (Fixed Position)

Includes
Gunner Zaku Warrior (Lunamaria Hawke Custom)
1/100 Lunamaria Hawke figurine (sitting)
EX-A1 Gunner Wizard
Beam cannon
Beam Assault Rifle magazine (non-functional)
Hand Grenades
Index-to-Pinky fingers
Fist
Trigger
Holding
Open
Beam Assault Rifle
Beam Tomahawk
1/100 Lunamaria Hawke figurine (standing)
Adapter for Action Base

Kit Features & Gimmicks
Articulation
Shoulder joints can raise up/swing forwards for upwards/frontwards articulation.
Arms and legs feature double-jointed elbow/knee parts.
Waist can tilt forwards or backwards in a limited manner.
Front, side and back skirt armors can pivot for the leg's clearance.
Pelvis joint can tilt forwards or backwards for increasing leg articulation.
Hip joints can...
Tilt upwards/downwards on each piece.
Rotate on each thigh.
Ankle joints can tilt.

Weapons/Other Gimmicks
Though undocumented in the instructions, the mono-eye can be moved left or right. (Removal on the helmet is required)
The cockpit hatch can be opened to reveal pilot figurine.
The Index-to-pinky finger parts can be swapped.
Hand Grenades can be optionally detached from the waist armor.
The left shield is articulated via the double joint.
The non-functional ammo packs can be optionally removed from the shield.
The Beam Assault Rifle's foregrip can flip out.
The Beam Assault Rifle can be folded into storage mode and mount onto the rear waist armor. (The mounting point is revealed by sliding down the piece)
The Beam Cannon can be folded out and rearrange into attack mode for the ZAKU Warrior to wield.
The cannon's foregrip can flip out.

Includes
RX-78-02 Gundam
Beam Sabers x2
Shoulder Cannon
Early Type Beam Rifle
Late Type Beam Rifle
Hyper Bazooka
Shield
1/100 Amuro Ray figurines (standing, sitting)
Adapter for Action Base 1
Sticker Decal sheet
Foil Sticker sheet

Kit Features & Gimmicks
Manipulators are fully articulated.
Cockpit hatch can open.
Both beam rifles can be stored on the shield or on the backpack.
Hyper bazooka can be stored on the back waist armor.
Shoulder armor separates for additional upward arm articulation range.
Manipulators have tabs for more stable weapon handling.
Left slot for beam saber handle on the backpack can be replaced with shoulder cannon.
The shield can be stored on the backpack.
Eyes can light up with the Gunpla LED Unit (sold separately)

Tips & Tricks
For better results, most of the details are needed to be applied and panel-lined with Gundam Markers.

Includes
Gundam Kyrios
1/100 Allelujah Haptism figurine (Sitting)
2 Beam Sabers
GN Beam Submachine Gun
Trigger handle
GN Shield
GN Shield Needle
2 GN Hand Missiles
One Handle
Forearm adapters
1/100 Allelujah Haptism figurine (Standing)
Adapter for Action Base

Machines - the last star of Mobile Suit Gundam 0083 OVA that appeared in

( This is a machine translation. Please allow for possible misinterpretations in the text. )
Weight : 735g

Includes
Gundam Exia
1/100 Setsuna F. Seiei figurine (sitting)
2 GN Beam Sabers
2 GN Beam Daggers
GN Sword
GN Shield
GN Short Sword
GN Long Sword
Display Stand for GN Drive
1/100 Setsuna F. Seiei figurine (standing)
Karel figurine
Damaged head
Damaged GN Sword
2-piece Cape

Kit Features & Gimmicks
Articulation
Manipulators feature 3+1+1 articulation and features tabs for stable weapon handling.
Arms and Legs feature double-jointed elbow/knee parts for a wider range of articulation.
Shoulder joints can...
Raise up for upwards articulation.
Swing forwards for extra frontwards articulation.
The hip joint axis can swing up and down.
The upper thigh joints can...
Tilt upwards/downwards on each piece.
Rotate on each thigh.
Ankle joints can tilt left or right.

Weapons/Other Gimmicks
Gundam Exia can be built with either normal or Repair forms.
The cockpit can be opened to reveal pilot figurine.
The two-piece toes on each foot are poseable.
Clavicle antennas can flip up and down on each piece.
GN Sword can convert into Rifle or Sword mode.
GN Beam Saber joints can pivot up & down.
GN Beam Dagger joints can fold out.
GN Beam Saber handles can be optionally removed from the shoulder armors as handheld weapons.
GN Beam Dagger handles can be optionally removed from the rear skirt armors as handheld weapons.
GN Long & Short Swords can be mounted onto the waist parts when slid out.
The side panels of the GN Shield can be slid out to form "expansion mode"
GN Drive can be displayed separately with the included display stand.
The shoulder cape is poseable.

Includes
Gundam Exia
1/100 Setsuna F. Seiei figurine (sitting)
2 GN Beam Sabers
2 GN Beam Daggers
GN Sword
GN Shield
GN Short Sword
GN Long Sword
Display Stand for GN Drive
1/100 Setsuna F. Seiei figurine (standing)
Karel figurine

[accessories]
· GN Sniper Rifle × 1
· GN Beam Pistol & Holster × 2
· GN beam sabel × 2
· GN shield × 2
· GN full shield × 2

- Accessories: Beam Sycthe, Active Cloak
Item Size/Weight : 39.2 x 31 x 8.3 cm / 752g

Includes

Gundam Barbatos
1/100 Mikazuki Augus figurine (sitting)
Mace
Dagger x2
Long Sword
Smoothbore gun
1/100 Mikazuki Augus figurine (standing)
Interchangeable fingers
Closed fist (1 pair)
Weapon-holding (1 pair)
Expressive/open-palm (1 pair)
Action Base adapter

Includes

God (G) Gundam
Core Lander
1/100 Domon Kasshu figurine (sitting)
2 Beam Swords
1 pair of fists
1 pair of angled palms
1 pair of God Fingers
1/100 Domon Kasshu figurine (standing)
1/20 Domon Kasshu figurine

Includes
ZGMF-X20A Strike Freedom Gundam
DRAGOONS x8 (EQFU-3X Super DRAGOON Mobile Weapon Wing & MA-80V Beam Assault Cannon)
Beam Saber x2 (MA-M02G "Super Lacerta")
Railgun x2 (MMI-M15E "Xiphias 3")
Beam Shield Generator x2 (MX2200)
High-energy Beam Rifle x2 (MA-M21KF)
Display Stand
Action Base 1 (Translucent Metallic Blue)
Special connector for AB1
Support Arms and connector parts for DRAGOONS x8
DRAGOON effect parts
1/100 Kira Yamato figurine
Mobile Suit Gundam SEED Destiny Poster

Accessories: Beam Rifle x2, Bazooka x2, Hand Grenade x4,
Missile Launcher with Grenade Launcher x2, Beam Blade x4, Shield x3,
Gatling Gun x6, Hyper Beam Javelin x2, Action Base Joint x4, Booster Vernier Stand x4
Item Size/Weight : 39.1 x 31.1 x 15.7 cm / 1673g