Includes
Zaku II Commander Type Char Aznable Custom
1/100 Char Aznable figurine (sitting)
Zaku Machine Gun
Bazooka
Heat Hawk
Adapter
Pilot Lift
1/100 Char Aznable figurine (standing)
Adapter for Action Base

Kit Features & Gimmicks
Articulation
Mono-eye can move when the head is turned sideways.
Manipulators feature 3+1+1 articulation on each finger and feature tab-holes for the weapons' molded tabs for gripping stability.
Shoulder joints can tilt forward for extra frontwards articulation.
Arms and Legs feature double-jointed elbow/knee parts for a wider range of articulation.
Both the shoulder armor and shield are jointed to avoid interference with the arms' articulation.
The upper thigh joints can...
Tilt upwards/downwards on each piece.
Rotate on each thigh.
Front, side and rear skirt armors can pivot to avoid interference with the legs' articulation.

Weapons/Other Gimmicks
The cockpit can swivel from left or right via a switch on the back. (removal for the backpack is required.).
Machine gun foregrip can swivel left or right.
The bazooka's foregrip can swivel left or right.
Machine Gun magazine can be optionally removed from the machine gun, and mount onto the rear waist armor.
Heat Hawk can be mounted onto the left waist armor via an adapter.
The pilot lift can be extended.
Zaku II can be mounted onto the Action Base via an adapter.

Tips & Tricks
For better results, some or most of the details (including the figurines) can be painted and panel-lined with Gundam Markers and/or Mr. Color Paints.
Topcoat (Mr. Hobby recommended) can be used to protect applied decals.
If using matte/flat-finish top coat, it is advisable not to spray on the clear/translucent parts - can be done by masking or spraying top coat while the said parts are separated.
The middle, ring, pinky fingers can be sliced off for individual articulation. (NOTE: May decrease gripping stability.)
Builders can choose between two options for the Commander's horn: "TV" and "Real" versions.
B-Club related customizations
High Detail Manipulator 148 can be used for this kit.

[ACCESSORIES]
GN Sword II x 2
GN Buster Sword III x 1 [2 parts]
GN Beam Saber x 2
GN Shield x 1 [2 parts]
0 Raiser / XN Raiser x 1
The MG 00 XN Raiser debuts in the Master Grade series to celebrate the Mobile Suit Gundam 00 10th anniversary! Even though it shares the same molds with the 00 Raiser this kit offers lots of newly molded parts, from the 0 Raiser's backpack extension XN Raiser to its GN Buster Sword IIIs!

The kit also comes with a mini stand to support its heavy weight backpack when in standing position. It also comes with a newly printed sheet of water slide decal for detailing.

- The kit became available worldwide as a regular retail kit, also to help celebrate the 00 Gundam's 10th anniversary. Limited quantities were made during the time of its first production.

The angelic form of Wing Zero as portrayed in the OVA "Gundam Wing Endless Waltz". Recreated in stunning proportion by famed mechanical designer Hajime Katoki, Wing Zero comes with its Twin Buster Rifle, which can combine for its iconic shooting pose. Also includes 2 beam sabers, deployable shoulder machine cannons, and a special display stand.

Includes

XXXG-01W Wing Gundam
Beam Saber
Buster Rifle
Energy Cartridge x3
Shield
1/100 Heero Yuy figurine x2 (1 sitting, 1 standing)
1 sheet of sticker decals
1 sheet of dry transfer decals
1 sheet of foil stickers
Interchangeable fixed-posed manipulator parts (fingers only)
Closed fist (1 pair)
Flexed fingers (1 pair)
Trigger-finger (1 pair)
Weapon-holding (1 pair)
Action Base adapter

Includes
Unicorn Gundam
Antenna
Transformable
Unicorn Mode
1/100 Banagher Links figurine (sitting)
1 pair of Beam Sabers
1 pair of Beam Tonfas
Beam Magnum
3x5 E-pacs
Hyper Bazooka
Ammo pack
Shield
1/100 figurines
Banagher Links (Pilot Suit) (Standing, sitting)
Banagher Links (Civilian suit)
Audrey Burne
Cardeas Vist
MS Cage
Storage container
Adapter for Action Base

Kit Features & Gimmicks
Articulation
Unicorn Gundam can convert into Unicorn or Destroy mode.
Manipulators feature 3+1+1 articulation on each finger.
Elbow joints can be bent to 130 degrees.
Knee joints can be bent to 80 degrees.
the upper thigh joints can...
Tilt upwards/downwards on each piece.
Rotate on each thigh.

Weapons/Other Gimmicks
Unicorn Gundam can convert into Unicorn or Destroy mode.
The antenna can be swapped with either transforming or non-transforming pieces.
The arms' Beam Saber panels can flip out to form Beam Tonfas.
The Beam Sabers on the backpack can be optionally removed as handheld weapons.
The Beam Magnum's E-Pacs can be swapped.
The Beam Magnum's barrel can be slightly pulled forward, and one of the upper E-pacs can be removed to recreate its reloading feature.
The Hyper Bazooka can be converted between standby and deployed forms.
Its ammo pack can be optionally separated from the weapon.
The shield's adapter is multi-jointed, allowing for some poses while mounted onto the forearm.
Beam Magnum and Hyper Bazooka can mount onto the backpack via flip-out tabs.
Each of their respective ammo packs can also be mounted onto the rear waist armor.
Unicorn Gundam (in Unicorn Mode) can mount onto the MS Cage.
The MS Cage's arms can swing forwards and backward.
All of the Weapons and Beam Saber effect parts can store onto the MS Cage.
Unicorn Gundam can mount with the Action Base via an adapter.

Includes
∀ Gundam
2 Beam Sabers
1 pair of Poseable hands (default)
1 pair of Multi-Purpose Silos
Core Fighter
Chest piece
Blue
White
Beam Rifle
Shield
Gundam Hammer
Adapter for Beam Rifle
Adapter for Shield
1 pair of open hands
1/100 Loran Cehack figure
1/100 Cow figure
Adapter for Action Base

Kit Features & Gimmicks
Articulation
Manipulators feature 1x5 articulation on each finger and features tabs for stable weapon handling.
Arms and Legs feature double-jointed elbow/knee parts for a wider range of articulation.
Shoulder joints can also tilt frontwards or backwards.
The waist can tilt in four directions, albeit in a slightly limited manner.
The upper thigh joints can...
Tilt upwards/downwards on each piece.
Rotate on each thigh.
Ankles can tilt, though limited due to the hindrance between the lower leg panels.

Weapons/Other Gimmicks
The central chest piece can be built with either the Anime-accurate (blue) or the Syd Mead design (white) colors.
The hands are swappable.
Core Fighter can be optionally detached from the front hip.
Beam Rifle can convert into default form or maximum output mode via minor parts rearrangement.
The shield grip...
Panels can flip up or down.
Can slide up or down.
The Chest (Multi-Purpose Silo) and back (Nanomachine Regeneration System) panels can be opened and closed.
The Beam Saber holsters can rotate on each piece.
Beam Rifle and Shield can mount onto the back via adapters.
The missiles on the Multi-Purpose Silo can be optionally removed to store the cow figurine inside.
Turn A Gundam can mount onto the Action Base via an adapter. (The cover piece on the back must be removed beforehand)

Tips & Tricks
For better results, some or most of the details are needed to be painted and panel-lined with Gundam markers and/or Mr. Color paints.
Topcoat (Mr. Hobby recommended) can be used to protect applied decals.
Customizing-based tips
The MG Expansion Effect Unit "Moonlight Butterfly" for ∀ Gundam can be used for the Gunpla.

- Accessories: Dober Gun, Shield, Beam Saber x2, 1/100 Zechs Marquise (Standing) 1/100 Zechs Marquise (Sitting), Fist (Left and Right), Open Palm (Left and Right), Weapon Grip (Left and Right)

- Accessories: 57mm High-Energy Beam Rifle, Anti-Beam Shield, Armor Schneider x2, Beam Saber x2, Ootori Striker Pack, Dedicated Stand
Item Size/Weight : 39.1 x 31.1 x 9.5 cm / 883g

Includes
Strike Noir Gundam
1/100 Sven Cal Bayang figurine (sitting)
2 "Shorty" Beam Rifles
Noir Striker pack
2 Beam Blades
2 Twin Linear Guns
Rocket Anchor
PVC Wire
Beam Rifle (Strike Gundam)
Beam Rifle (Duel Gundam)
1 pair of holding hands
1 pair of trigger hands
1 pair of splayed hands
1/100 Sven Cal Bayang figurine (standing)

Kit Features & Gimmicks
Articulation
Shoulder panels can flip up to reveal mechanical details.
Shoulder joints can push forward/pull up for extra front/upwards articulation.
Front, side, and rear skirt armors are poseable to avoid interference with the leg articulation.
Arms and legs feature double-jointed elbow/knee parts for a wider range of articulation.
Weapons/Other Gimmicks
​​​​Manipulators feature 3+1+1 articulation.
The cockpit can be opened to reveal pilot figurine.
Rifles can be wielded with the trigger hands for better stability.
Shorty" Beam Rifles can be optionally detached from the waist armors as handheld weapons.
Rocket anchor effect can attach onto any of the widespread hand parts, underneath the legs, or the Striker pack.
Beam Rifle's (Strike Gundam) foregrip can pivot.
Beam Rifle's (Duel Gundam) grenade can be optionally removed from the launcher.
Noir Striker (with Twin Linear Guns) can be rearranged into attack mode.
Beam Blades can be optionally detached from the Striker pack as handheld weapons.
Rocket anchor effect can attach onto any of the splayed hand parts, underneath the legs, or the Striker pack.
Beam Rifle's (Strike Gundam) foregrip can pivot.
Beam Rifle's (Duel Gundam) grenade can be optionally removed from the launcher.
Strike Noir can also mount with other Striker Packs from other MG Strike Gundam kits.

Tips & Tricks
For better results, some or most of the details are needed to be applied & panel-lined with Gundam Markers and/or Mr. Color paints.
Topcoat (Mr. Hobby recommended) can be used to protect applied decals.
The MG Weapon Parts Campaign exclusive Bazooka for Aile Strike Gundam add-on can be used for this kit.
Customizing-based tips
The Strike Noir Gundam can be mounted with other Striker packs from the same line.
B-Club related customizations
The Weapon Accessory WA-24 and WA-27 can be used for this kit to mount with the Sword and Launcher Strikers from two of the 1/100 Gundam SEED Model Series kits.
High Detail Manipulators 43, 44, and 213 can be used for this kit. (repaint on the dorsal is required

- Accessories: IWSP Striker Pack x1, Beam Rifle x1, Combined Shield x1, Armor Schneider x2, Anti-Ship Sword x1

- Accessories: Beam Rifle, Shield, Beam Saber x2, Bazooka,
Joint for Action Base 1, Figure (standing, seated)
Item Size/Weight : 39.3 x 31.3 x 12.5 cm / 1080g

- Mobile Suit Gundam: Unicorn's Crimson Comet, the Sinanju is re-released as a Master Grade kit following design specifications from the anime- including the iconic bazooka!
- Includes redesigned marking decals
- Inner Frame material changed from PVC to paintable ABS.
- Anime-accurate bazooka included, and equipped with a telescoping gimmick.

- Accessories: Beam Rifle , Shield, Beam Saber x2, Beam Axe x2,
Bazooka, Pilot Figure (standing, sitting), Joint for Action Base 1
Item Size/Weight : 39 x 31 x 12.3 cm / 1168g

- Accessories: Tanegashima Gun x1, Nichirinmaru Katana x1, Denkoumaru Naginata x1, Sankoumaru Jumonji Yari x1
Item Size/Weight : 39 x 31.1 x 9.4 cm / 931g

- Accessories: Nichirinmaru , Tanegashima Gun, Sankoumaru Jumonji Yari, Denkoumaru Naginata, Folding Screen, Spear Stand x2, Gun/Sword Stand

- Accessories: Dragon Fang, Beam Trident, Shield

- Accessories: Kiku-ichimonji (Katana), Kotetsu (Katana), Oni Tate Shield

- Following the 2012 release of the the v Gundam comes Char’s rival Suit: the hugely-anticipated Sazabi Ver.Ka!
- A year after the release of the MG v Gundam Ver.Ka, rival Suit Sazabi has appeared at last. Featuring engineering techniques created for the MG RX-78-2 Gundam 3.0 and the v Gundam Ver.Ka, the Sazabi is one of the most advanced kits to date.
- MG Sazabi Ver.Ka designed in conjunction with the CG images shown of at the Gundam Front Tokyo DOME-G, and is paired with the similarly designed v Gundam

- Accessories: Sazabi Shield, Beam Tomahawk, Beam Rifle, Funnel x6

- Accessories: Shield, Heat Shotel x2, Beam Machine Gun
Item Size/Weight : 31 x 20 x 11.3 cm / 586g

Bandai really challenged itself with this kit- just one year after releasing the MG Full Armor Unicorn Gundam Ver.Ka, they’ve translated the classic v Gundam into a Ver.Ka!
- Three years before the Unicorn Gundam tested its mettle against the Sinanju, the v Gundam, piloted by Amuro Ray, dueled Char’s mighty Sazabi! Realized as a highly detailed kit, this v Gundam was redesigned by Mr. Hajime Katoki, and features a streamlined, powerful shape, transforming Psycho Frame, fully jointed manipulators and a full set of marking decals- expect this to be a beautiful kit!

- Accessories: Beam Rifle, Shield, Beam Saber (large), Beam Saber (small),
Fin Funnel x6
Item Size/Weight : 39.2 x 31.3 x 11 cm / 1163g

Includes

RX-78-2 Gundam
2 Beam Sabers
Core Block
1/100 Amuro Ray figurine (sitting)
Beam Rifle
Shield
Bazooka
Transformable Core Fighter
1/100 Amuro Ray figurine (standing)
A Sheet of Marking decals
Adapter for Action Base 1
Kit Features & Gimmi

Includes
Unicorn Gundam
Antenna
Transformable
Unicorn Mode
1/100 Banagher Links figurine (sitting)
1 pair of Beam Sabers
1 pair of Beam Tonfas
Beam Magnum
3x5 E-pacs
Hyper Bazooka
Ammo pack
Shield
1/100 Banagher Links figurine (Standing)
Adapter for Action Base

Kit Features & Gimmicks
Articulation
Unicorn Gundam can convert into Unicorn or Destroy mode.
Manipulators feature 3+1+1 articulation on each finger.
Elbow joints can be bent to 130 degrees.
Knee joints can be bent to 80 degrees.
the upper thigh joints can...
Tilt upwards/downwards on each piece.
Rotate on each thigh.

Weapons/Other Gimmicks
Unicorn Gundam can convert into Unicorn or Destroy mode.
The antenna can be swapped with either transforming or non-transforming pieces.
The arms' Beam Saber panels can flip out to form Beam Tonfas.
The Beam Sabers on the backpack can be optionally removed as handheld weapons.
The Beam Magnum's E-Pacs can be swapped.
The Beam Magnum's barrel can be slightly pulled forward, and one of the upper E-pacs can be removed to recreate its reloading feature.
The Hyper Bazooka can be converted between standby and deployed forms.
Its ammo pack can be optionally separated from the weapon.
The shield's adapter is multi-jointed, allowing for some poses while mounted onto the forearm.
Beam Magnum and Hyper Bazooka can mount onto the backpack via flip-out tabs.
Each of their respective ammo packs can also be mounted onto the rear waist armor.
Unicorn Gundam can mount with the Action Base 1 via an adapter.

Includes

Re-GZ
2 Beam Saber hilts
Removable 2-tube hip Grenade Launchers
Beam Rifle
Shield
2 Beam Sabers (attack mode)
B.W.S. (Back Weapon System)
Display Stand
1/100 Amuro Ray figurines (standing, sitting)