MG Full Armor Gundam FA-78 Thunderbolt Ver Ka
3,600.00 Php 3,600.00 Php PHP 3600.0

Available

Accessories: dual beam rifle, rocket launcher, beam saber × 3 (beam blade × 2), shield × 4, pedestal
MG Freedom V2.0
2,800.00 Php 2,800.00 Php PHP 2800.0

Available

Includes
Freedom Gundam
2 Beam Sabers
Index-to-Pinky fingers
Holding
Relaxed
Trigger (right)
Beam Rifle
Shield
1/100 Kira Yamato figurines (standing, sitting)
Display Stand
Adapter
MG FAZZ Ver Ka
6,500.00 Php 6,500.00 Php PHP 6500.0

Out of Stock

-Under the supervision of Hajime Katoki, armament and additional armor are composed with new interpretations. Pursuing proportions that do not become dull while maintaining a profound feeling.
-Uses a movable roll for the forearm to achieve a wide range of movement. When the arm is raised horizontally, it is structured to move in conjunction so that the additional armor does not interfere.
-When raising the legs, additional armor of the front armor is deployed upwards to ensure a range of motion.
-Missile pods loaded in various places are reproduced with interpretation unique to Ver.Ka. You can also open and close the hatch manually and enjoy the built-in missile display.
-Includes Ver.Ka decals that include different chest numbering. The FAZZ platoon in the work can be reproduced.

[accessories]
・ Double beam rifle X 1
・ Hyper Mega Canon × 1
・ Water transfer decal x 1
・ Foil seal x 1
MG Epyon EW
2,600.00 Php 2,600.00 Php PHP 2600.0

Out of Stock

- A next generation Mobile Suit kit, Endless Waltz's Gundam Epyon rockets into action!
- Complete transformation from MS form to MA form.
- Equipped with a variety of gimmicks to express the Epyon's unique abilities!
- MA form features 4-point jointed movable neck
- Opening jaw gimmick (held in the sole of the Mobile Suit's foot).
- Epyon claw completely re-imagined, now sitting flush with the forearm and featuring an extending gimmick, giving a sense of movement.
- Heat rod incorporates bending mechanism thanks to jointed parts.
- Interlocking moving wings extend by pulling down on the bottom.
- Marking decals designed by Hajime Katoki.

- Accessories: Heat rod (Shield), Beam Sword
Item Size/Weight : 39.2 x 31.3 x 8.4 cm / 861g
MG Double X Gundam
2,200.00 Php 2,200.00 Php PHP 2200.0

Out of Stock

Accessories: Twin Satellite Cannon x2, Buster Rifle, Hyper Beam sword x2, Defense Plate
MG Destiny Extreme Blast Mode
3,650.00 Php 3,650.00 Php PHP 3650.0

Out of Stock

MG Deathscythe EW
2,250.00 Php 2,250.00 Php PHP 2250.0

Out of Stock

- Following the Wing Gundam, the Gundam Deathscythe is the next step in the EW Master Grade line!
- Utilizing the highly mobile XXXG Frame, the Deathscythe has the wide range of motion that we’ve come to expect from the MG series!

- What is the XXXG Frame?
A brand new frame built for the four non-transforming Gundams based on the Wing Gundam (Gundam Deathscythe, Gundam Heavyarms, Gundam Sandrock, Shenlong Gundam).
- Replaceable hand mechanisms increases weapon manipulation and dynamic posing options.
- Buster Shield: beam effect part can be attached for Expanded Claw mode.
- Beam Scythe: The beam part been created with clear material, and Scythe body can be stored on the backpack.
- Marking decals designed by Hajime Katoki.

- Accessories: Beam Scythe, Buster Shield, Beam Parts for the Buster Shield
Item Size/Weight : 31 x 20 x 11.3 cm / 543g
MG Crossbone X-1 Full Cloth
2,500.00 Php 2,500.00 Php PHP 2500.0

Out of Stock

- Accessories: Buster Gun x1, Scissor Anchor Cable x2, Scissor Anchor Chain x2, Beam Saber x2, Heat Dagger x2, Beam Shield x1, Brand Marker x2, Beam Zanber x1, Hi-Murasama Blaster x1, Peacock Smasher x1
MG Buster
2,500.00 Php 2,500.00 Php PHP 2500.0

Out of Stock

- Accessories: 350mm Gun Launcher, 94mm High-Energy Rifle,
Fist (Left and Right), Open Palm (Left and Right)
MG Blitz
2,600.00 Php 2,600.00 Php PHP 2600.0

Out of Stock

- Accessories: Trikeros Shield, Lancer Dart, Beam Saber x2,
Gleipnir Claw
MG Astray Red Frame
2,800.00 Php 2,800.00 Php PHP 2800.0

Out of Stock

Includes
Gundam Astray Red Frame
1/100 Lowe Guele figurine (sitting)
Tactical Arms IIL
Beam torch
Beam Saber effect
"Gerbera Straight" Katana
"Tiger Pierce" Katana
Action Base 2 (Red)
1/100 Lowe Guele figurine (sitting)
Adapter for Action Base 1

Kit Features & Gimmicks
Articulation
Manipulators feature 3+1+1 articulation and features tabs for stable weapon handling.
Arms and Legs feature double-jointed elbow/knee parts for a wider range of articulation.
Shoulder joints can...
Raise up for upwards articulation.
Push forwards for extra frontwards articulation.
The upper thigh joints can...
Tilt upwards/downwards on each piece.
Rotate on each thigh.
Ankle joints can tilt left or right.
Front foot pieces can tilt.

Weapons/Other Gimmicks
Cockpit hatch can be optionally opened to reveal pilot figurine.
Tactical Arms IIL can convert into:
V form
Flight Form
Delta Form
Sword Form
Arrow Form
Work Form
The two Katanas can be unsheathed from their respective scabbards.
Astray Red Frame Kai can attach onto the Action Base 1 via an adapter. (Sold separately)
The Tactical Arms IIL's Flight Form (if attached to the Astray Red Frame kai can mount onto the included Action Base 2.

Tips & Tricks
For better results, some or most of the details are needed to applied/panel lined with Gundam Markers and/or Mr. Color paints.
Topcoat (Mr. Hobby recommended) can be used to protect applied decals.
The middle, ring, pinky fingers can be sliced off for individual articulation. (NOTE: May decrease gripping stability.)
MG Astray Blue Frame D
2,900.00 Php 2,900.00 Php PHP 2900.0

Out of Stock

Accessories: Twin Gun x2, DRAGOON Blade x10, Sword Pedestal
MG Aegis
2,550.00 Php 2,550.00 Php PHP 2550.0

Available

- Accessories: 60mm High-Energy Beam Rifle, Beam Saber x4,
Grip (Left and Right), Open Palm (Left and Right)
MG 00 Seven Sword Trans Am Special Coating
5,850.00 Php 5,850.00 Php PHP 5850.0

Available

MG 00 Raiser
3,350.00 Php 3,350.00 Php PHP 3350.0

Out of Stock

- MG Raiser, go!
- Internal frame structure based partly off original Gundam 00 and partly off the Raiser.
- Utilize the Gunpla LEDs to showcase GN particle emissions in the head, GN Drives, and particle storage tanks.
* This product has five LED-enabled locations, and includes a single LED unit. Four additional Gunpla LED units required for full effect..
- Cockpit block features opening hatch.
- Raiser binder is equipped with opening gimmick.
- Thanks to new molds, weapons such as Raiser Sword can be recreated.

- Accessories: GN Sword II x2, GN Shield, GN Sword III, GN Beam Saber,
1/100 pilot figure (Standing, Sitting)
Item Size/Weight : 39.1 x 31.2 x 9.5 cm / 992g
MG 00 Qan[T]
2,300.00 Php 2,300.00 Php PHP 2300.0

Out of Stock

Includes
00 Qan[T]
6 GN Sword Bits
GN Sword V
GN Drive display stand
Setsuna F. Seiei figurine
Action Base 2 Display Stand

Kit Features & Gimmicks
Articulation
Manipulators feature 3+1+1 articulation.
The wrists feature double-jointed parts.
Elbow joints feature a wider range of articulation due to its circular design.
The legs feature double-jointed knee parts.
The hip joint axis can swing up and down.
The upper thigh joints can...
Tilt upwards/downwards on each piece.
Rotate on each thigh.
Ankle joints can tilt left or right.
The toes on each foot are poseable.

Weapons/Other Gimmicks
GN Sword V can convert into Sword or Rifle mode.
GN Sword can be mounted onto the side waist armor via parts swapping.
GN Sword Bits can detach from or attach on the Shield.
The Sword Bits on the shield can rearrange to form firing mode.
GN Sword Bits can combine with GN Sword V & can be rearranged into GN Buster Sword or GN Buster Rifle.
The GN Sword Bits can be used as individual melee weapons via flip-out handles.
GN Drive can detach from 00 Qan[T] and can be displayed separately with the GN Drive display stand.
00 Qan[T] can be rearranged into Quantum Burst Mode.
GN Drive can light up with Green LED Unit (Sold Separately)

Tips & Tricks
For better results, some/most of the details are needed to be applied & panel-lined with Gundam Markers and/or Mr. Color paints.
Top coat (Mr. Hobby recommended) can be used to protect applied decals.
If using matte/flat-finish top coat, it is advisable not to spray on the clear/translucent parts - can be done by masking or spraying top coat while the said parts are separated.
The middle, ring, pinky fingers can be sliced off for individual articulation. (NOTE: May decrease gripping stability.)
Megasize RX-78-2 1/48
4,500.00 Php 4,300.00 Php PHP 4300.0

Available

Includes
RX-78-2 Gundam
2 Beam Sabers
Beam Rifle
Shield
1 pair of trigger hands
2 Double Separators
Kotobukiya MSG #13 Grind Circle
1,100.00 Php 1,100.00 Php PHP 1100.0

Available

[accessories]

- Engine Parts
- Rail × 2
- Circular blade (Silver molding)
- Circular blade (Clear molding)
- Rail connecting parts
- Grip A × 2
- Grip B × 2
- Body connection parts × 2
- Small blade A × 8
- Small blade B × 4
HG Zaku II Psycho Zaku Thunderbolt
1,450.00 Php 1,450.00 Php PHP 1450.0

Out of Stock

Reuse/P/device loading Darryl's crimson high mobility type Zaku

●Abundant weapons and wrist parts are included. The backpack that can be equipped with armament also reproduces the sub arm.
● Sub-arm storage and deployment can be reproduced with replacement parts.
HG Zabanya #67
1,000.00 Php 1,000.00 Php PHP 1000.0

Out of Stock

- Accessories: Beam Rifle (pistol) × 2, × 2 sets bits
HG Wing Gundam Zero #174
950.00 Php 950.00 Php PHP 950.0

Out of Stock

- From the anime Mobile Suit Gundam Wing, the HGAC of the Wing Gundam Zero!
- The first High Grade of Heero’s beloved Wing Gundam Zero from Gundam W, this kit is designed to enable transformation into Neo-Bird form.
- Twin Buster Rifle can combine into full form or be split in two, and shoulder vulcans are expandable.

- Accessories: Twin Buster Rifle, Wing Shield, Beam Saber x2,
Vulcan Cannon x2, Manipulator (Left and Right)
Item Size/Weight : 29.9 x 19 x 5.9 cm / 275g
HG Vual #037
750.00 Php 750.00 Php PHP 750.0

Out of Stock

- Official Gaiden Gundam Astaroth nemesis that appeared in the Mobile Suit Gundam Blood and iron Orufenzu month steel] [Gundam vual] is kit!

- Deployment gimmick the Astaroth origin was conscious
Adopt a deployment gimmick in a backpack as an original gimmick. Reproduce the settings you have installed a Astaroth origin original armor.

- Comes with a variety of weapons!
Mining hammer, Spartan shield, Ghraib × 1

- Customizable also be combined with the Orpheus lens series of other HG Blood and iron!
First reproduce the arms shape of the exposed Gundam frame in the HG series.
Waist and back of the joint by HG Blood and iron of Orpheus lens series, parts mounting and recombination can also be of other products.

- Accessories: mining hammer × 1, Spartan shield × 1, shoulder shield × 1, × 1 Ghraib
HG Vidar #027
750.00 Php 750.00 Php PHP 750.0

Out of Stock

Includes
Gundam Vidar
Rifle
Burst Saber hilt
Burst Saber blade
2 Hand guns
1 pair of hands (sword-wielding)

Kit Features & Gimmicks
Rifle can attach on either side of the waist armors.
Burst Saber hilt can attach oh either Burst Saber blade's holes in each side waist armor.
The Hunter's Edge on the pair of feet can flip out.

Tips & Tricks
The open hands included in the 7th Option Set can be used for this Gunpla.
HG Union Flag Mass Production Type #02
800.00 Php 800.00 Php PHP 800.0

Out of Stock

Reproduce the form at the time of flight to the head deformation by incorporating the deformation mechanism and slide up and down.
- Deformation, you can store the rifle to the abdomen in front of the aircraft.
- Rifle, the shield can be mounted left and right hands, and arms. Feather in backpack, waist fold
Reproduce the mechanism that I folded.
- Armed Includes: (can be installed in both hands), shield rifle × 1 × 2 (can be installed in both arms),
(Included beam) saber × 1

( This is a machine translation. Please allow for possible misinterpretations in the text. )

Item Size/Weight : 29.7 x 19 x 5.3 cm / 234g
This is a preview of the recently viewed products by the user.
Once the user has seen at least one product this snippet will be visible.

Recently viewed Products